Citrix Systems Network Cables 8200 User Manual download pdf (Page 10)

Data bits: 8

arity: None

Stop bits: 1

Flow control: None

Log on to the NetScaler with the following credentials:

User name: nsroot

Password: nsroot

To configure the NetScaler by using the command line

interface

At the command prompt, type:

set ns config -ipaddress<IPAddress> -netmask<subnetMask>

add ns ip<IPAddress> <subnetMask> -type<type>

add route<network> <netmask> <gateway>

set system user <userName> -password

save ns config

reboot

Example

set ns config -ipaddress 10.102.29.60 -netmask

255.255.255.0

add ns ip 10.102.29.61 255.255.255.0 -type snip

add route 0.0.0.0 0.0.0.0 10.102.29.1

set system user nsroot -password

Enter password: *****

Confirm password: *****

save ns config

reboot

Note: For information about deploying a high availability (HA) pair

, see "Configuring

High Availability."

LCD Keypad Setup

To set up the appliance by using the LCD keypad on the front panel of the appliance,

press the "<" key on the keypad, and enter the following initial settings in the order

shown:

1. Subnet mask

Quick Installation and Configuration

1 2 ... 5 6 7 8 9 10 11 12 13 14

No comments

Citrix Systems Network Cables 8200 User Manual Page 10